0 item(s) / Total: $0  
 Internal Rotary Broaches
 Hex Rotary Broach
 Square Rotary Broach
 Torx Rotary Broach
 Rotary Broach Tool Holders
 8mm Broach Tool Holder
 1/2'' Broach Tool Holder
 Micro Broach Holder
 Rotary Broach Brake
 External Rotary Broaches
 Rotary Broach Specials
 Double D Rotary Broach
 Double Hex Broach
 Double Square Broach
 Involute Rotary Broach
 Serration Rotary Broach
 Spline Rotary Broach
 Torx Rotary Broach
 Keyway Rotary Broach
 Micro Broaches
 Rotary Broach Attachments
 Go/No-Go Gauges
Home > Go/No-Go Gauges
 

Go/No-Go Gauges

Go No/Go Gauges

Broach gauges can be used to make sure that the size of the hexagon or square hole has been machined properly. Broach gauges are held to tight tolerances.

Polygons broach gauges are made as GO and NO/GO pairs. Each gauge (or Gage) is designed to be held by hand and inserted into the hexagon or square hole. If the NO/GO gauge fits, then the hole is too large and the part fails inspection. If the GO gauge fits, then the hole is the right size and the part will pass inspection. If the hole was too small the GO gauge would not have fit inside. Gauges also can help to determine of there is too much twist in the form, a common feature of holes manufactured using the rotary broaching process.

Broach gauges are made of durable hardened M-2 tool steel. Broach gauges have no taper, and are made to custom shapes and sizes. For more information, call Polygon Solutions at (239) 628-4800.



Rotary Broaching Tool Holder

SW Regional Manufacturers Association of Florida

 
 
imts 

16770 Link Court, Suite #106
Fort Myers, Florida 33912
239-628-4800 | fax 239-628-4801
Follow Us on Twitter Be Our Friend on Facebook

ABOUT SSL CERTIFICATES